Service Mode Printer Canon G1010 G2010 G3010 G4010 Service Tool Canon ST5302 untuk Reset. Service Mode Printer Canon G1010 G2010 G3010 G4010 Service Tool Canon ST5302 untuk Reset. Sections of this page. Accessibility Help. How to start the Canon IJ Printer Assistant Tool. Canon IJ Printer Assistant Tool can be started in the following ways. Click Maintenance and Preferences icon in the Maintenance tab of the printer driver. From Windows Start menu, click (All apps, Apps, or All Programs-) Canon Utilities- IJ Printer Assistant Tool.
the tools that you need to do this can be downloaded here :
CANON G2010 SERVICE TOOL
Download and extract using WinRAR or any aps that support unzipping file archive.
Canon G2010 Resetter Tool Windows 10
Canon G2010 problem code 5B00 mean the waste ink counter overflow, you should be reset Canon G2010 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times. Alternatively Green (Power) and Orange.
And computer show up problem “SupportCode: 5B00”
Now , enter Canon G2010 service mode:
How to put Canon G2010 printer in service mode :
Step 1: Turn off Canon G2010 printer
Step 2: Press and hold printer’s RESET button
Step 3: Press and hold printer’s POWER button.
Step 4: Released printer’s RESET button, POWER still pressed
Step 5: Press and released Canon G2010 printer’s RESET button 5 times @ 6 times (Bypass scanner)
Step 6: Released Canon G2010 printer’s POWER button:
Now, Canon G2010 printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
Step 7: When computer detect FOUND NEW HARDWARE, press CANCEL
Run the service tool that we downloaded earlier..click on 'Accept'
Now click 'Start' under the Canon Tool
Now click the service tool in the number order...after clicking '1' the printer will print some number code, make sure the printer is loaded with 1 piece of paper.
After clicking '2' the printer will move it printhead a few times, just wait until it stop.
After clicking '3' the printer will print status sheet.
and you are all done, just restart the printer and you can print normally again.
Now check Canon G2010 printer status in Control Panel, If it shows “Printer is online“, your Canon G2010 printer is ready to print – no errors – no waste Counters Overflow.
Howdy teachers and forumers! Previously, we have released our helpful and working tutorial on How to Manually Reset Epson Printers Without Using Any Software. To our surprise, many have also requested for the same tutorial about Canon printers. We don’t want to disappoint our readers that’s why as promised and due to popular demand, here is our tutorial on how to manually reset Canon printers without using any software.
SIGNS THAT YOUR PRINTER NEEDS RESETTING
- You will see a message that says “Waste ink pad is full“ or something like that.
As we have said the last time, this tutorial will literally save you a couple hundred bucks. This type of reset method is also called a hard reset. It has been tried and tested on the following Canon printer models:
- Canon MX870
- Canon MG5430
- Canon Pixma MG6620
- Canon Pixma MP495
- Canon MG2440.
- Canon MX439
- Canon MX925
- Canon MP560
- Canon MG2550
- Canon iX6820
- Canon MP150
Canon G2000 Resetter Download
How to Manually Reset Canon Printers Without Using Any Software
STEP 1: Make sure that your printer is turned on.
STEP 2: Press the power button (this will turn off/switch off your printer)
STEP 3:Once turned off, press on STOP button for two (2) seconds.
STEP 4:While holding on to the STOP button, press the power button at the same time for two (2) seconds and release the STOP button.
STEP 5: After letting go of the STOP button (while you are still pressing the power button), press the STOP button five (5) times.
STEP 6: Immediately after pressing the STOP button for five (5) times, release the power button.
That’s it! You’re done! Your Canon printer will now go on reset mode. The LCD screen on printer should go blank. Your printer will start making a couple of noises but it’s normal. Once the printer stopped making noises, just press on the power button. This will turn off or restart your printer.
If in case your printer asks for a new driver, just reinstall your Canon printer’s driver.
Thank you for following my tutorial. If you find this helpful , please share it with your friends on social media. Thank you so much! Also, please support us by following DepEd Forum on Facebook and Twitter. Thank you so much!
OTHER TUTORIALS: